Fixturlaser PAT

With the Fixturlaser PAT, you are never in doubt on whether your belt transmissions are aligned or not. By using the groove as reference, you will achieve a precise alignment which reduces belt wear, bearing failures and vibrations.

Simple alignment

The Fixturlaser PAT comes with two line laser transmitters, each equipped with two spring loaded guides which fit into the pulley grooves. The use of two laser transmitters with integrated targets makes it very easy to find out what kind of alignment that is required. Parallel offset, angular error and twist is instantly visible to the operator.

Within a few minutes the operator can determine if the machine requires alignment or not.

suitcase contents

Fixturlaser PAT – complete system

2 boxes of V-guide tips
1 pair of laser transmitters
4 batteries, LR 03 1.5V (AAA)
Technical specifications


Weight (incl. all standard parts): 1,5 kg (3,3 lbs)
Storage Temperature: -20 to 70°C (-4 to 158°F)
Material: High Impact ABS Plastic
Sealing: Dust, water (5m/16 feet), and air tight with air pressure compensation valve
Drop Test: 3 m (10 feet) on to concrete floor
Dimensions: 250 x 180 x 80 mm  (9,84 x 7,09 x 3,15 inch)
Measuring units
Housing Material: Extruded aluminum (molded PA cover)
Operating Temp: 0 to 40°C (32 to 104°F)
Relative Humidity: 10 – 90%
Weight: 340 g (12 oz)
Dimensions: 61 x 77 x 61 mm (2,4 x 3 x 2,4 in)
Environmental Protection:  IP 65
Laser: 630 – 675 nm class II diode laser
Laser Line Fan Angle: 90°
Laser Power: < 1 mW
Measurement Distance: 50 mm – 6000 mm (1,97 – 236,22 in)
Measurement Accuracy: Better than 0,5 m (0,02 in) or 0,2 degrees
Pulley Diameter Range: From 75 mm (2,95 in) and larger (standard)
Pulley Belt Groove Width: 6 mm – 40 mm (0,23 – 1,57 in) (standard)
Power Supply: 2 pcs of LR03 (AAA)1,5 V per unit
Operating time: 20 hours of continuous operation
Laser Safety: